Rubber gloves are a kind of gloves made of rubber sheets or films. According to the use of acid and alkali resistant gloves, electrical insulation gloves, radiation - proof gloves, medical gloves. According to rubber raw materials or manufacturing process latex gloves and moulded gloves. According to the use of acid and alkali resistant gloves, electrical insulation gloves, radiation - proof gloves, medical gloves.
Advantages of using rubber gloves:
Silicon rubber has good temperature resistance, electrical insulation, oxygen resistance and aging resistance, light resistance and aging resistance as well as mildew resistance and chemical stability.
The high and low temperature resistance, can be use for a long time under 200 ℃, under 60 ℃ still elastic;
Electrical insulation: silicon rubber has excellent dielectric properties, especially at high temperature, which is much better than ordinary organic rubber.
Excellent weather resistance, ozone resistance and uv irradiation resistance, no crack in outdoor use for a long time.
1. Wear gloves of the appropriate size, not too large or too small.
2. Sterile medical rubber gloves shall be worn when entering the cleaning room to contact the product directly or indirectly.
3. Wash hands with purified water after wearing gloves, and alcohol after drying. After drying, the product can be contacted.
4. The gloves off (with the inner side facing out) shall not be placed at will, especially the gloves shall not touch the product directly or indirectly.
5. The gloves should be disinfected every 2 hours. The disinfection method is to purify the water first and then the alcohol.
6. After disinfection, gloves shall not be in direct contact with skin or articles at risk of contamination (such as labels, tape, etc.).
7. Replace the gloves when they are damaged or the surface is contaminated with improper cleaning.
8. When wearing gloves, the cuff of the non-dust jacket must be covered